Fabricant de produits chimiques de haute qualité
Ligne directrice nationale de consultation :+86 021-64208466

Photoinitiator MBF CAS:15206-55-0

15206-55-0 - Names and IdentifiersNameMethyl benzoylformateSynonymsMBFPI-MBFSyna 468IHT-PI MBFD

Courriel : info@standard-groups.com

Contenu

15206-55-0 - Names and Identifiers

NomMethyl benzoylformate
SynonymesMBF
PI-MBF
Syna 468
IHT-PI MBF
Darocur MBF
Photoinitiator-MBF
photo sensitizer MBF
Methyl benzoylformate
Methyl benzoyl formate
Methyl phenylglyoxylate
methyl oxo(phenyl)acetate
Methyl-α-oxo-phenylacetate
Phenylglyoxylic acid methyl ester
Glycopyrronium Bromide EP Impurity H
alpha-oxo-benzeneaceticacimethylester
alpha-Oxobenzeneacetic acid methyl ester
Benzeneaceticacid,.alpha.-oxo-,methylester
Glycopyrronium Bromide Impuritiy 3 (Methyl benzoylformate)
CAS15206-55-0
EINECS239-263-3
InChIInChI=1/C9H8O3/c1-12-9(11)8(10)7-5-3-2-4-6-7/h2-6H,1H3

15206-55-0 - Physico-chemical Properties

Formule moléculaireC9H8O3
Masse molaire164.16
Densité1.155 g/mL at 25 °C (lit.)
Point de fusion16°C
point Boling246-248 °C (lit.)
Point d'éclair > 230°F
Solubilité dans l'eau2g/L at 20℃
ApparenceLiquide
Gravité spécifique1.161.155
CouleurClear yellow
BRN1100868
Condition de stockageConserver à moins de +30°C.
Indice de réfractionn20/D 1.528
Propriétés physiques et chimiquesDensity 1.155
boiling point 246-248°C
refractive index 1.525-1.527

15206-55-0 - Risk and Safety

Description de la sécurité24/25 - Avoid contact with skin and eyes.
Wgk Allemagne1
Code SH29183000
ToxicitéLD50 orally in Rabbit: > 5000 mg/kg LD50 dermal Rat > 5000 mg/kg

15206-55-0 - Reference Information

LogP1.9 at 23℃
preparation of benzoyl formic acidhydrolysis of methyl benzoyl formate to give good quality benzoyl formic acid
gas chromatographic analysis of 2, 4-dichloro-5-aminophenyl isopropyl etherwith 2.5% OV-210, 2M stainless steel packed column, with methyl benzoylformate as internal standard, at 145 ℃ column temperature, 2, 4-dichloro-5-aminophenyl isopropyl ether and 2, A mixture of 4-dichloro-5-nitrophenyl isopropyl ether was quantitatively analyzed. The coefficient of variation was 0.22% and 0.23%, the average recovery was 99.96% and 100.07%, the linear correlation coefficient was 0.9999.
Utilisationmethyl benzoylformate is an intermediate of the herbicide buprozin.
used in organic synthesis.
UV-curable coatings and inks
Méthode de productionobtained by esterification of benzoyl acid with methanol. Cyclomethanol and benzoylformic acid were added to the reaction pot, and sulfuric acid was added slowly with stirring. After heating to reflux for 12h, excess methanol was recovered. The esterification was neutralized with dilute sodium carbonate solution, the oil layer was separated, and the water layer was extracted with benzene. The extract was combined with the oil layer, dried over anhydrous sodium sulfate, and then distilled. The solvent benzene was recovered first, and then the low boiling matter was distilled off under reduced pressure. Then the 137-146 ° C. (2.4kPa) fraction was collected and taken as methyl benzoylformate. The raw material benzoylformic acid used was obtained by oxidation of styrene (see 04960), and the yield of esterification based on benzoylformic acid was more than 50%.
The preparation method is to add sodium chloride and sulfuric acid in the reaction bottle, stir at room temperature, Dropwise add benzoyl nitrile, control the temperature at about 30 ℃, and keep the heat for 3 h after dropping, then methanol was added dropwise, and the temperature was raised and refluxed for 5 h. After the reaction was completed, methanol was removed under reduced pressure to obtain a finished product.
Température d'auto - inflammation>500°C


Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.


Message en ligne

Détails de contact

Téléphone de l'entreprise

+86-21-6420 0566

Heures de travail

Du lundi au vendredi

Téléphone portable:

13816217984

Courriel :

info@qinsun-lab.com

Code QR