1. Composition & Basic PropertiesTable 1: Fundamental CharacteristicsParameterSpecificatio
Courriel : info@standard-groups.com
| Parameter | Specification Range |
|---|---|
| Chemical Base | MS Polymer (Silane-terminated polyether) |
| Apparence | Paste-like, non-sag |
| Densité | 1.2-1.4 g/cm³ |
| Solids Content | ≥99% |
| Tack-free Time | 15-60 minutes |
| Cure Mechanism | Moisture curing |
| Full Cure Time | 24-72 hours |
| Shore A Hardness | 20-60 |
| Elongation at Break | ≥200% |
| Type | Key Features | Primary Applications |
|---|---|---|
| Standard Grade | Good adhesion, UV resistant | Construction joints, glazing |
| Elastic Grade | High elongation (≥400%) | Expansion joints, concrete repair |
| Low-modulus | Reduced stress on substrates | Sensitive materials bonding |
| Fast-cure | Tack-free in <30 minutes | Production line applications |
| Paintable | Compatible with coatings | Architectural finishes |
| Property | MS Sealant | Polyurethane | Silicone | Acrylic |
|---|---|---|---|---|
| Adhesion | Excellent | Good | Excellent | Fair |
| Paintability | Oui | Limited | No | Oui |
| UV Resistance | Excellent | Good | Excellent | Fair |
| Movement Capacity | ±25-50% | ±25% | ±50% | ±10-15% |
| Temperature Range | -40°C to +90°C | -40°C to +80°C | -60°C to +200°C | -20°C to +70°C |
| VOC Content | Low | Medium | Low | Medium |
Superior adhesion to most substrates without primer
Excellent weather resistance and UV stability
Paintable surface after full cure
Low VOC and odor compared to polyurethanes
Good elasticity with permanent flexibility
Non-staining to porous materials
| Parameter | Requirement |
|---|---|
| Substrate Temp | 5°C-40°C |
| Ambient RH | 40-80% |
| Joint Design | Depth:Width = 1:1 to 2:1 |
| Tooling Time | 5-15 minutes |
| Minimum Application Thickness | 3 mm |
| Maximum Application Thickness | 15 mm (single application) |
| Aspect | Spécification |
|---|---|
| Shelf Life | 9-12 months (unopened) |
| Storage Temp | 5-25°C |
| Packaging | Cartridge, sausage, pail |
| Skin-over Time | 10-30 minutes |
| Clean-up | Specific solvent before curing |
Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.
Téléphone de l'entreprise
+86-21-6420 0566
Heures de travail
Du lundi au vendredi
Téléphone portable:
13816217984
Courriel :
info@qinsun-lab.com
