1. Fundamental PropertiesTable 1: Typical Technical SpecificationsParameterSpecification R
Courriel : info@standard-groups.com
| Parameter | Specification Range | Test Method |
|---|---|---|
| Application Temperature | 110-140°C | ASTM D3236 |
| Open Time | 30-180 seconds | ISO 11343 |
| Tensile Strength | 8-20 MPa | ISO 527 |
| Elongation at Break | 200-500% | ISO 527 |
| Peel Strength (Textile/Substrate) | 6-12 N/mm | DIN 53282 |
| Viscosity @ 120°C | 5.000-25.000 mPa·s | ASTM D3236 |
| Densité | 1.10-1.25 g/cm³ | ISO 1183 |
| Moisture Cure Time (24h) | 70-90% final strength | - |
| Component | Bonding Requirements | PUR Advantages |
|---|---|---|
| Headliners | Lightweight bonding, sag resistance | Excellent initial grab |
| Door Panels | Structural integrity, vibration damping | High fatigue resistance |
| Seat Assemblies | Foam-to-fabric bonding | Penetration control |
| Instrument Panels | Multi-material bonding | Thermal stability |
| Acoustic Insulation | Porous material adhesion | Deep fiber anchoring |
| Decorative Trims | Precision application | Clean processing |
| Characteristic | Reactive PUR HM | EVA Hot Melt | Solvent-based PU | Acrylic PSA |
|---|---|---|---|---|
| Initial Tack | ★★★★ | ★★★★★ | ★★ | ★★★★★ |
| Final Strength | ★★★★★ | ★★ | ★★★★ | ★★★ |
| Heat Resistance | ★★★★☆ (150°C) | ★★ (80°C) | ★★★★ (120°C) | ★★ (70°C) |
| Vibration Damping | ★★★★★ | ★★ | ★★★★ | ★★★ |
| Curing Mechanism | Moisture | Physical | Chemical | Physical |
| VOC Emission | <50g/L | <20g/L | 300-600g/L | <5g/L |
| Substrate Versatility | ★★★★★ | ★★★ | ★★★★ | ★★★★ |
Application Equipment:
Optimal Conditions:
| Substrate Type | Surface Preparation | Bond Strength Rating |
|---|---|---|
| PP/EPDM | Flame treatment | ★★★☆ |
| ABS/PC | Solvent wipe | ★★★★★ |
| Polyurethane Foam | None required | ★★★★★ |
| Nylon Fabrics | None required | ★★★★☆ |
| Aluminum | Abrasion + cleaning | ★★★★ |
| Leather | Mechanical abrasion | ★★★★☆ |
| Requirement | Test Method | Target Value |
|---|---|---|
| Heat Aging (120°C/1000h) | ISO 188 | ≤20% strength loss |
| Cold Flexibility (-40°C) | DIN 53122 | No cracking |
| Fogging Test | SAE J1756 | <3mg |
| Odor Evaluation | VDA 270 | ≤3.5 rating |
| Flammability | FMVSS 302 | Self-extinguishing |
Next-Gen Developments:
Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.
Téléphone de l'entreprise
+86-21-6420 0566
Heures de travail
Du lundi au vendredi
Téléphone portable:
13816217984
Courriel :
info@qinsun-lab.com
