Fabricant de produits chimiques de haute qualité
Ligne directrice nationale de consultation :+86 021-64208466
Emplacement actuel :Accueil > Produits > Produits chimiques > Agrochimiques >

3-Chloropropionic acid CAS No.107-94-8

107-94-8 - Names and IdentifiersName3-Chloropropionic acidSynonymsNSC 174HSDB 20533-chloropropa

Courriel : info@standard-groups.com

Contenu

107-94-8 - Names and Identifiers

Nom3-Chloropropionic acid
SynonymesNSC 174
HSDB 2053
3-chloropropanoate
3-chloro-propionicaci
3-Chloropropanic acid
3-Chloropropionic acid
β-Chloropropionic acid
Dapoxetine impurity 27
3-Chloropropanoic acid
acide3-chloropropanoique
beta-Chloropropionic acid
Propanoic acid, 3-chloro-
Propionic acid, 3-chloro-
Brexpiprazole Impurity 67
beta-monochloropropionicacid
beta-Monochloropropionic acid
CAS107-94-8
EINECS203-534-4
InChIInChI=1/C3H5ClO2/c4-2-1-3(5)6/h1-2H2,(H,5,6)/p-1
InchikeyQEYMMOKECZBKAC-UHFFFAOYSA-N

107-94-8 - Physico-chemical Properties

Formule moléculaireC3H5ClO2
Masse molaire108.52
Densité1,27 g/cm3
Point de fusion37 °C
point Boling203-205°C(lit.)
Point d'éclair > 230°F
Solubilité dans l'eaufreely soluble
SolubilitéH2O: soluble50mg/mL, clear, colorless
pression vapeur0.147mmHg at 25°C
ApparenceCrystalline Low Melting Mass
CouleurWhite to beige
Merck14,2159
BRN1098495
Le PKA3.98(at 25℃)
Condition de stockageConserver à moins de +30°C.
Indice de réfraction1.4380 (estimate)
Propriétés physiques et chimiques

physical and chemical properties: White Crystal

melting point 37-41°C

boiling point 203-205°C

flash point 125°C

water-soluble freely soluble

UtilisationFor organic synthesis, medicine, dyes, pesticide intermediates.

107-94-8 - Risk and Safety

Symboles de dangerC - Corrosive
Codes de risqueR35 - Causes severe burns
R34 - provoque des brûlures
R21/22 - Harmful in contact with skin and if swallowed.
Description de la sécuritéS26 - En cas de contact avec les yeux, rincer immédiatement avec beaucoup d'eau et consulter un médecin.
S36 / 37 / 39 - porter des vêtements de protection appropriés, des gants et une protection oculaire / faciale.
S45 - en cas d'accident ou de malaise, consulter immédiatement un médecin (en montrant l'étiquette si possible).
Un idUN 3261 8/PG 2
Wgk Allemagne1
Base de données sur la toxicité des substances chimiquesUE8750000
Code F de la marque Fluka3-10
TSCAOui
Code SH29159080
Classe de danger8
Catégorie d'emballageIII

107-94-8 - Upstream Downstream Industry

Matières premièresPropionic acid
Produits en aval3-Chloropropionyl chloride

107-94-8 - Reference Information

LogP0.41
Utilisationorganic synthesis intermediate for the production of anti-epileptic pain drugs.
used as pesticide and pharmaceutical intermediates
used in organic synthesis.
Méthode de productionThere are a variety of preparation methods. Propionic acid is chlorinated to 3-chloropropionic acid at about 20 °c under ultraviolet light; Very small amounts of hydroquinone may also be added to the acrylic acid and then reacted below 20 °c with dry hydrogen chloride. The final product was obtained by distillation under reduced pressure. Further, acrylonitrile was added to hot hydrochloric acid, and the reaction was conducted under reflux for 6 hours. The reactant was cooled, the resulting ammonium chloride was filtered, extracted with diethyl ether, washed with 20% ammonium chloride solution to remove hydrochloric acid, and dried to recover diethyl ether, followed by distillation under reduced pressure to obtain 3-chloropropionic acid. 3-chloropropionic acid can also be prepared by reacting acrolein with hydrogen chloride to form chloropropionaldehyde, followed by nitric acid oxidation, or by nitric acid oxidation of 3-chloro-1-propanol.
Catégoriecorrosive article
Classe de toxicitéHaute toxicité
Toxicité aiguësubcutaneous-mouse LDL0: 1040 mg/kg
caractéristiques de danger d'inflammabilitéflammable; Toxic chloride smoke generated by heating
Caractéristiques de stockage et de transportThe warehouse is ventilated and dried at low temperature; It is stored separately from oxidants and alkalis.
fire extinguishing agentSand, foam, water mist, carbon dioxide
Occupational StandardSEL 5 mg/m3


Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.


Message en ligne

Détails de contact

Téléphone de l'entreprise

+86-21-6420 0566

Heures de travail

Du lundi au vendredi

Téléphone portable:

13816217984

Courriel :

info@qinsun-lab.com

Code QR