Formulation：Green pigment 12%+Polyol 55%+Extenders 25%+Additive 8%2-Component Polyurethane Flooring
Courriel : info@standard-groups.com
Formulation：Green pigment 12%+Polyol 55%+Extenders 25%+Additive 8%
| Category | Specifications |
|---|---|
| Product Type | Two-part aliphatic polyurethane |
| Component A | Hydroxyl-functional acrylic resin |
| Component B | Polyisocyanate hardener (HDI trimer) |
| Mix Ratio (A:B) | 4:1 or 5:1 (volume basis) |
| Pot Life (25°C) | 30-90 minutes |
| Touch Dry | 2-4 hours |
| Full Cure | 7 days (at 25°C/50% RH) |
| Key Properties | Performance Data |
|---|---|
| Adhesion | ≥4.5 MPa (concrete) |
| Abrasion Resistance | ≤30 mg (CS-10. 1000 cycles) |
| Chemical Resistance | Excellent vs. oils, fuels, weak acids |
| Impact Resistance | 50 kg·cm (ASTM D2794) |
| Gloss Retention | >80% after 1000h QUV |
| Physical Properties | Values |
|---|---|
| Solid Content | 60-70% |
| VOC Content | 300-400 g/L |
| Recommended DFT | 80-150 μm |
| Service Temperature | -40°C to +120°C |
| Color Stability | ΔE<1 (1000h UV) |
| Application Data | Guidelines |
|---|---|
| Substrate Prep | Concrete: ISO 8501-1 Sa2.5 |
| Application Methods | Roller, brush, airless spray |
| Ambient Conditions | 10-30°C, RH<80% |
| Recoat Window | 16-24 hours |
| Coverage Rate | 0.15-0.25 kg/m²/100μm |
| Safety & Compliance | Standards |
|---|---|
| Point d'éclair | Component A: 38°C; B: 45°C |
| GHS Classification | H315. H317. H319. H335 |
| Shelf Life | 12 months (25°C) |
| PPE Requirements | Respirator, gloves, goggles |
| Regulatory Compliance | REACH, EPA compliant |
| Avantages | Limitations |
|---|---|
| Superior UV resistance | Higher cost than epoxy |
| Excellent abrasion resistance | Sensitive to moisture |
| Maintains color/gloss | Requires precise mixing |
| Flexible film | Longer cure time than epoxy |
| Chemical resistant | Limited pot life |
| Comparison | Polyurethane | Epoxy |
|---|---|---|
| UV Stability | ★★★★★ | ★★☆ |
| Chemical Resistance | ★★★★ | ★★★★★ |
| Abrasion Resistance | ★★★★★ | ★★★★ |
| Moisture Tolerance | ★★☆ | ★★★★ |
| Application Window | ★★★ | ★★★★ |
Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.
Téléphone de l'entreprise
+86-21-6420 0566
Heures de travail
Du lundi au vendredi
Téléphone portable:
13816217984
Courriel :
info@qinsun-lab.com
