IntroductionFully Methylated Melamine-Formaldehyde Resin (FMMF): Overview and Key PropertiesCat
Courriel : info@standard-groups.com
Fully Methylated Melamine-Formaldehyde Resin (FMMF): Overview and Key Properties
| Category | Details |
|---|---|
| Chemical Type | Hexamethoxymethylmelamine (HMMM) |
| CAS Number | 3089-11-0 |
| Apparence | Colorless to pale yellow viscous liquid |
| Solubilité | Soluble in water, alcohols, and most organic solvents |
Chemical Structure & Properties
| Property | Value | Significance |
|---|---|---|
| Methylation Degree | >95% | Ensures complete reactivity |
| Viscosity (25°C) | 300–800 mPa·s | Impacts application flow |
| pH | 8.5–10.5 | Stabilizes resin in storage |
| Reactive Sites | 6 methoxy groups per molecule | High crosslinking density |
Curing Performance
| Parameter | Range | Notes |
|---|---|---|
| Self-Cure Temp. | 150–180°C | Requires strong acid catalyst |
| Co-Cure Temp. | 120–150°C | With hydroxyl/acid functional resins |
| Gel Time | 5–15 min @ 150°C | Catalyst-dependent |
| Industry | Application | Key Benefit |
|---|---|---|
| Coatings | Automotive clearcoats | High gloss, chemical resistance |
| Textiles | Wrinkle-resistant finishes | Durable crosslinks |
| Paper | Wet-strength additives | Improves fiber bonding |
| Adhesives | Wood composites | Low formaldehyde emission |
| Component | Typical % | Purpose |
|---|---|---|
| FMMF Resin | 15–30% | Primary crosslinker |
| Acid Catalyst | 0.5–2% (e.g., p-TSA) | Cure acceleration |
| Co-Resin | 50–70% (e.g., acrylic/polyester) | Flexibility adjustment |
| Additifs | 1–5% | Flow/leveling control |
| Feature | FMMF | Partially Methylated MF | Urea-Formaldehyde |
|---|---|---|---|
| Reactivity | High | Moderate | Low |
| Formaldehyde Emission | Very Low | Moderate | High |
| Water Resistance | Excellent | Good | Fair |
| Cost | $$ | $ | $ |
| Parameter | Status |
|---|---|
| VOC Content | <250 g/L (compliant) |
| Food Contact | FDA 21 CFR 175.300 |
| Storage | 12 months @ 25°C (inert atmosphere) |
Fully methylated melamine-formaldehyde resins deliver superior crosslinking efficiency with minimal formaldehyde release, making them ideal for high-performance coatings and industrial applications. Their high reactivity requires precise catalyst selection but enables energy-efficient curing processes.
Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.
Téléphone de l'entreprise
+86-21-6420 0566
Heures de travail
Du lundi au vendredi
Téléphone portable:
13816217984
Courriel :
info@qinsun-lab.com
