1. Product OverviewTable 1: Basic Product SpecificationsParameterSpecificationTest MethodC
Courriel : info@standard-groups.com
| Parameter | Spécification | Test Method |
|---|---|---|
| Chemical Base | Modified silane | FTIR Analysis |
| Apparence | Clear liquid | Visual |
| Density (20°C) | 0.95-1.05 g/cm³ | ISO 2811 |
| Viscosity (25°C) | 10-50 mPa·s | DIN 53019 |
| Point d'éclair | ≥65°C | ISO 2719 |
| Solid Content | 5-15% | DIN 53185 |
| pH Value | 4.5-6.5 | ISO 976 |
| Solvent System | Ethanol/Water | GC Analysis |
| Substrate Type | Surface Preparation | Adhesion Improvement | Recommended Cure Condition |
|---|---|---|---|
| PP/EPDM | Plasma treatment | 300-400% | 80°C × 30min |
| ABS | Solvent wipe | 200-250% | RT × 24h |
| Aluminum | Abrasion + degrease | 150-200% | 100°C × 15min |
| Glass | Alcohol cleaning | 180-220% | RT × 12h |
| Painted Surfaces | None required | 120-150% | 60°C × 45min |
Table 3: STD-7255 vs Alternative Adhesion Promoters
| Characteristic | STD-7255 | Silane-based | Titanate-based | Chrome-based |
|---|---|---|---|---|
| Environmental Impact | Low | Medium | Low | High |
| Substrate Versatility | ★★★★★ | ★★★ | ★★★★ | ★★★★ |
| Thermal Stability | 200°C | 180°C | 220°C | 250°C |
| Humidity Resistance | ★★★★★ | ★★★★ | ★★★ | ★★★★ |
| Application Method | Spray/Dipping | Spray | Brush | Spray |
| Cure Speed | Fast | Medium | Slow | Medium |
| VOC Content | <50g/L | 100-200g/L | <30g/L | 150-300g/L |
Surface Preparation:
Clean with isopropanol
Abrade non-polar surfaces
Maintain surface temperature 15-35°C
Application Methods:
Spray coating: 2-5μm wet film
Dip coating: 10-30 sec immersion
Brush application: Even coverage
Curing Parameters:
Air dry: 5-10 minutes
Force dry: 60-80°C for 5-15 minutes
Full cure: 24h at RT or 1h at 80°C
Key Advantages:
Excellent chemical resistance
UV stability
Low odor formulation
Water-based compatibility
Non-yellowing properties
Limitations:
Not for continuous immersion
Limited shelf life after opening
Requires dry storage
| Test | Method | Acceptance Criteria |
|---|---|---|
| Adhesion | ISO 2409 | Class 0-1 |
| Humidity Resistance | DIN 50017 | 500h no delamination |
| Thermal Cycling | SAE J1885 | 50 cycles stable |
| Salt Spray | ASTM B117 | 720h ≤2mm creepage |
| Peel Strength | ASTM D3330 | ≥4 N/mm |
| Aspect | Requirement |
|---|---|
| Storage Temperature | 5-30°C |
| Shelf Life | 12 months |
| PPE Requirements | Gloves, goggles |
| Ventilation | Required |
| Disposal | Hazardous waste |
Automotive interior/exterior trim bonding
Plastic-metal hybrid components
Electronic component encapsulation
Industrial composite manufacturing
Glass fiber reinforced plastics
Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.
Téléphone de l'entreprise
+86-21-6420 0566
Heures de travail
Du lundi au vendredi
Téléphone portable:
13816217984
Courriel :
info@qinsun-lab.com
