IntroductionComposition: water-soluble polymers containing hydrophobic groupsAppearance: light
Courriel : info@standard-groups.com
Composition: water-soluble polymers containing hydrophobic groups
Appearance: light yellow slightly turbid viscous liquid
Active ingredient: 18%
Solvent: water
Application range:
Suitable for all types of water coating systems
| Category | Specifications |
|---|---|
| Le nom | Rheology Modifier STD-9048 |
| Chemical Type | Hydrophobically modified alkali-swellable emulsion (HASE) |
| Apparence | Milky white liquid |
| Active Content | 30±1% |
| pH Value | 2.5-4.0 (as supplied) |
| Viscosity (25°C) | <100 mPa·s (neat) |
| Density (25°C) | 1.05 g/cm³ |
| Solubilité | Water-thickenable |
| Key Performance | Characteristics |
|---|---|
| Rheology Profile | Strong pseudoplastic behavior |
| pH Activation | Activates at pH >6.5 |
| Shear Recovery | >90% recovery within 60 sec |
| Compatibility | Excellent in latex systems |
| Syneresis Control | Prevents water separation |
| Applications | Recommended Use |
|---|---|
| Architectural Coatings | Interior/exterior paints |
| Textile Coatings | Print paste thickener |
| Adhesives | PSA formulations |
| Paper Coatings | Improves runnability |
| Ceramic Glazes | Controls suspension |
| Performance Advantages | Benefits |
|---|---|
| High Efficiency | 0.2-0.8% dosage sufficient |
| Spatter Resistance | Excellent roll/brush application |
| Color Acceptance | No negative impact on tint strength |
| Freeze-Thaw Stability | 5 cycles without performance loss |
| Low VOC | <5 g/L |
| Usage Guidelines | Recommendations |
|---|---|
| Activation Method | Neutralize to pH 7.5-9.5 with ammonia/amine |
| Addition Point | Post-dispersion at 25-50°C |
| Mixing | Moderate agitation (400-800 rpm) |
| Storage Conditions | 5-35°C, avoid freezing |
| Shelf Life | 12 months |
| Safety & Compliance | Standards |
|---|---|
| Point d'éclair | None (aqueous) |
| GHS Classification | Not hazardous |
| Regulatory Status | REACH compliant |
| Biodegradability | >60% in 28 days |
| PPE Requirements | Safety glasses recommended |
| Technical Comparison | STD-9048 | Cellulose-based |
|---|---|---|
| Viscosity Build | Faster activation | Slower hydration |
| Spatter Resistance | Excellent | Poor |
| pH Stability | Stable in pH 4-10 | Limited stability |
| Microbial Resistance | Inherent | Requires biocides |
| Cost Efficiency | 40% dosage reduction | Standard |
References:
Product Technical Data Sheet (2024)
Progress in Organic Coatings (2023)
Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.
Téléphone de l'entreprise
+86-21-6420 0566
Heures de travail
Du lundi au vendredi
Téléphone portable:
13816217984
Courriel :
info@qinsun-lab.com
