Fabricant de produits chimiques de haute qualité
Ligne directrice nationale de consultation :+86 021-64208466

Nitrobenzene(C6H5NO2)

IntroductionThe chemical formula C₆H₅NO₂ represents nitrobenzene, an aromatic nitro compound. N

Courriel : info@standard-groups.com

Contenu

Présentation

The chemical formula C₆H₅NO₂ represents nitrobenzene, an aromatic nitro compound. Nitrobenzene is a pale yellow oil that smells like almonds. It’s toxic and can cause cancer.

Properties

Melting point: 42.26 °F (5.7 °C)

Boiling point: 411.6 °F (210.9 °C)

Molar mass: 123.11 g/mol

Density: 1.2 g/cm³

Chemical properties

It has active chemical properties and can be reduced to diazonium salts, azobenzene, etc. It will burn and explode when exposed to open flames and high heat. It reacts violently with nitric acid. It is obtained by nitrating benzene with a mixture of nitric acid and sulfuric acid. It is used as an intermediate in organic synthesis and as a raw material for the production of aniline. Nitrobenzene must undergo electrophilic substitution reactions under relatively strong conditions to generate meta-products; it has a weak oxidizing effect and can be used as an oxidant for oxidative dehydrogenation. Nitrobenzene is often produced by reacting benzene with a mixed acid of nitric acid and sulfuric acid. It is mainly used to produce aniline, benzidine, azobenzene, etc. Nitrobenzene is highly toxic. Inhaling a large amount of vapor or contaminating the skin can cause acute poisoning, oxidizing or complexing hemoglobin, turning the blood into dark brown, and causing headaches, nausea, vomiting, etc.

Production and uses

Nitrobenzene is produced from benzene on a large scale.

It’s used to make aniline, which is then used to make dyes, drugs, pesticides, and synthetic rubber.

It’s also used to make lubricating oils.

Health effects Nitrobenzene is toxic by inhalation and skin absorption, It can cause cancer, It can cause male reproductive toxicity, and It can cause skin burns.

Formule moléculaireC6H5NO2
Masse molaire123.11
Densité1.196 g/mL at 25 °C (lit.)
Point de fusion5-6 °C (lit.)
point Boling210-211 °C (lit.)
Point d'éclair190°F
Solubilité dans l'eauslightly soluble
Solubilité1.90g/l
pression vapeur0.15 mm Hg ( 20 °C)
Vapor Density4.2 (vs air)
ApparenceLiquide
CouleurClear yellow
Limite d'expositionTLV-TWA 1 ppm (~5 mg/m3) (ACGIH,MSHA, and OSHA); IDLH 200 ppm(NIOSH).
Merck14,6588
BRN507540
Le PKA3.98(at 0℃)
PH8.1 (1g/l, H2O, 20℃)
Condition de stockageConserver à moins de +30°C.
StabilitéStable. Incompatible with strong oxidizing agents, strong reducing agents, strong bases. Flammable. Note wide explosion limits.
Limite explosive1.8-40%(V)
Indice de réfractionN20 / D 1551 (litre)
Propriétés physiques et chimiquesThe pure product is colorless to light yellow oily liquid.
melting point 5.85 ℃
boiling point 210.9 ℃
relative density 1.2037
refractive index 1.55296
flash point 88 ℃
soluble in ethanol, ether and benzene, slightly soluble in water.
The Pure product is a colorless to pale yellow oily liquid. Soluble in ethanol, ether and benzene, water-soluble.
UtilisationNitrobenzene is an important organic intermediate thereof. Nitrobenzene was sulfonated with sulfur trioxide to obtain m-nitrobenzene sulfonic acid. It can be used as a dye intermediate, mild oxidant and anti-dye salt s. Nitrobenzene was sulfonated with chlorosulfonic acid to obtain m-nitrobenzenesulfonyl chloride, which was used as intermediate of dye, medicine and so on. Nitrobenzene is chlorinated to M-nitrochlorobenzene, which is widely used in the production of dyes and pesticides. After reduction, M-chloroaniline can be obtained. Used as a dye orange GC, is also a pharmaceutical, pesticide, fluorescent whitening agent, organic pigment intermediates. Nitrobenzene re-nitration can be m-dinitrobenzene, by reduction can be m-phenylenediamine, used as dye intermediates, epoxy resin curing agent, petroleum additives, Cement accelerator, M-dinitrobenzene such as sodium sulfide for part also principle to M-nitroaniline. For the dye orange base R, is an intermediate of azo dyes and organic pigments.
 

Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.


Message en ligne

Détails de contact

Téléphone de l'entreprise

+86-21-6420 0566

Heures de travail

Du lundi au vendredi

Téléphone portable:

13816217984

Courriel :

info@qinsun-lab.com

Code QR