Fabricant de produits chimiques de haute qualité
Ligne directrice nationale de consultation :+86 021-64208466
Emplacement actuel :Accueil > Produits > Autres >

Mercure, ammonié CAS 10124-48-8

Mercury, ammoniated - Names and IdentifiersNameMercury, ammoniatedSynonymsammoniatedMercury, am

Courriel : info@standard-groups.com

Contenu

Mercury, ammoniated - Names and Identifiers

NomMercury, ammoniated
Synonymesammoniated
Mercury, ammoniated
aminomercurychloride
hydrargyrumammoniatum
mercuricamidochloride
Mercury chloride azanide
Quecksilberchloridazanid
ammoniatedmercuricchloride
ammonium mercuric chloride
Chlorure azanide de mercure
hydrargyrumprecipitatumalbum
mercury,ammonobasic(hgnh2cl)
mercury(ii)chlorideammonobasic
CAS10124-48-8
EINECS233-335-8
InChIInChI=1/ClH.Hg.H3N/h1H;;1H3/q;+2
InchikeyWRWRKDRWMURIBI-UHFFFAOYSA-M

Mercury, ammoniated - Physico-chemical Properties

Formule moléculaireClH2HgN
Masse molaire252.07
Densité5.38
Point de fusion383°C (dec.)
point Bolingsublimes [CRC10]
Solubilité dans l'eauinsoluble H2O, EtOH; soluble warm acid [CRC10]
Apparencewhite solid
CouleurWhite powder
L'odeurOdorless
Merck13,5902
StabilitéStable.
UtilisationFor the pharmaceutical industry

Mercury, ammoniated - Risk and Safety

Codes de risqueR26/27/28 - Very toxic by inhalation, in contact with skin and if swallowed.
R33 - Danger of cumulative effects
R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. 
Description de la sécuritéS13 - Keep away from food, drink and animal foodstuffs.
S28 - After contact with skin, wash immediately with plenty of soap-suds.
S45 - en cas d'accident ou de malaise, consulter immédiatement un médecin (en montrant l'étiquette si possible).
S60 - This material and its container must be disposed of as hazardous waste.
S61 - Éviter le rejet dans l'environnement. Se référer aux instructions spéciales / fiches de données de sécurité.  
Un id2025
Wgk Allemagne3
Base de données sur la toxicité des substances chimiquesOV7020000
Code SH28521000
Classe de danger6.1(a)
Catégorie d'emballageII

Mercury, ammoniated - Upstream Downstream Industry

Matières premièresAmmonium hydroxide
Mercury
Mercury(II) chloride
Chlorine
Ammoniac

Mercury, ammoniated - Reference Information

Informations sur les produits chimiques de l'EPAInformations fournies par: ofmpub.epa.gov (lien externe)
properties state: yellow spherical pore size (nm):~ 0.3 silicon-aluminum ratio: ~ 2 bulk density (g/ml):0.75 residual moisture content (wt%):0.09 diameter (mm):3-5 Na2Owt%:6.8
application is mainly used for drying petroleum cracked gas, olefin, refinery gas and oil field gas. it is an industrial desiccant for chemical industry, medicine, hollow glass and other industries.
storage conditions room temperature; The relative humidity is not more than 90%; It is not suitable to be directly exposed to the air. Avoid water, acid and alkali.
utilisation used in pharmaceutical industry
antiseptic, used for skin and mucous membrane infection.
Méthode de production 20g HgCl2 is dissolved in 400mL of water to prepare a solution, and then the solution is mixed with 31mL of 6mol/L ammonia water. When the product is precipitated, it is filtered and washed with 180mL of cold water. (The amount of washing water must be strictly controlled, because excessive water consumption will cause part of the product to contain HgNH2Cl · H2O, which will make the product yellow.) Then the precipitate is dried at 30°C without light. When the product appears to be dry, it is ground into powder, and further dried at 30°C to finally obtain 18.5g of mercury amine chloride.
CatégorieSubstances toxiques
toxicity classification highly toxic
acute toxicity oral-rat LD50: 86 mg/kg; Oral-mouse LD50: 68 mg/kg
caractéristiques de danger d'inflammabilité combustible, mercury-containing fire is emitted from the fire site, and nitrogen oxides are spicy to stimulate smoke
Caractéristiques de stockage et de transport warehouse ventilation and low temperature drying; separate from oxidant and food storage and transportation
fire extinguishing agent dry powder, sand
occupational standard TWA 0.05 mg (mercury)/m3; STEL 0.15 mg (mercury)/m3
Données sur les substances toxiquesinformations fournies par: pubchem.ncbi.nlm.nih.gov (lien externe)

Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.


Message en ligne

Détails de contact

Téléphone de l'entreprise

+86-21-6420 0566

Heures de travail

Du lundi au vendredi

Téléphone portable:

13816217984

Courriel :

info@qinsun-lab.com

Code QR