75-08-1 - Names and IdentifiersNameEthanethiolSynonymsEM(TM) RTEthanethiolETHANETHIOLMERCAPTAN
Courriel : info@standard-groups.com
| Nom | Ethanethiol |
| Synonymes | EM(TM) RT Ethanethiol ETHANETHIOL MERCAPTAN C2 Mercaptan C2 Ethylmercaptan Ethyl mercaptan ETHYL MERCAPTAN 1-Mercaptoethane mercury diethanethiolate |
| CAS | 75-08-1 |
| EINECS | 200-837-3 |
| InChI | InChI=1/2C2H6S.Hg/c2*1-2-3;/h2*3H,2H2,1H3;/q;;+2/p-2 |
| Formule moléculaire | C2H6S |
| Masse molaire | 62.13 |
| Densité | 0.839g/mLat 25°C(lit.) |
| Point de fusion | -148 °C |
| point Boling | 35°C(lit.) |
| Point d'éclair | 1°F |
| JECFA Number | 1659 |
| Solubilité dans l'eau | Soluble in alcohol, ether, waterMiscible with alcohol, petroleum naphtha, acetone, dilute alkali and ether. Slightly miscible with water. |
| Solubilité | 6.8g/l |
| pression vapeur | 8.51 psi ( 20 °C) |
| Vapor Density | 2.1 (vs air) |
| Apparence | Liquide |
| Couleur | Colorless |
| L'odeur | Strong chunk; offensive garlic. |
| Limite d'exposition | TLV-TWA 0.5 ppm (～1.3 mg/m3 ) (ACGIHand MSHA); ceiling 10 ppm (OSHA); IDLH2500 ppm (NIOSH). |
| Merck | 14,3726 |
| BRN | 773638 |
| Le PKA | 10.6(at 25℃) |
| Condition de stockage | Conserver à moins de +30°C. |
| Stabilité | Stable. Extremely flammable - note low flash point. Incompatible with oxidizing agents, strong acids. May form explosive mixtures with air. |
| Limite explosive | 2.8-18%(V) |
| Indice de réfraction | n20/D 1.4306(lit.) |
| Propriétés physiques et chimiques | Colorless transparent oily liquid with strong persistent pungent garlic odor. Volatile in the air. melting point -147.89 ℃ boiling point 35 ℃ relative density 0.8391 refractive index 1.4310 soluble in water, 20 ° C in water solubility of 1.5% (weight ratio), soluble in alkaline water and ethanol, ether and other organic solvents. |
| Utilisation | For pesticide intermediates, warning gas |
| Codes de risque | R11 - hautement inflammable R20 - nocif par inhalation R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R12 - Extremely Flammable R20/22 - Harmful by inhalation and if swallowed. |
| Description de la sécurité | S16 - Éloigner les sources d'allumage. S25 - Avoid contact with eyes. S60 - This material and its container must be disposed of as hazardous waste. S61 - Éviter le rejet dans l'environnement. Se référer aux instructions spéciales / fiches de données de sécurité. |
| Un id | UN 2363 3/PG 1 |
| Wgk Allemagne | 3 |
| Base de données sur la toxicité des substances chimiques | KI9625000 |
| Code F de la marque Fluka | 13 |
| TSCA | Oui |
| Code SH | 2930 90 98 |
| Classe de danger | 3 |
| Catégorie d'emballage | I |
| Toxicité | LD50 orally in Rabbit: 682 mg/kg |
| Produits en aval | Ethyl thioacetate |
| FEMA | 4258 | ETHANETHIOL |
| olfactory Threshold | 0.0000087ppm |
| Henry's Law Constant | 3.57(x 10-3 atm?m3/mol) at 25 °C (Przyjazny et al., 1983) |
| Application | used in pesticide intermediates, warning gas ethanethiol is an important pesticide intermediate, for the synthesis of organophosphorus insecticides phorate phosphorus, phosphorus, isopropyl phosphorus, phosphorus absorption, methyl phosphorus absorption and herbicides, in addition, can also be used as reagents and gas odorants, liquid fuel additives, and for pharmaceutical synthesis. ethanethiol is an important pesticide intermediate, which is used in the production of organophosphorus pesticide isopropylphosphorus, phorate phosphorus, phorate phosphorus, internal phosphorus uptake, methyl phosphorus uptake, etc. It may also be used for the production of an antimicrobial agent 401. When the concentration of ethyl mercaptan in the air is only 50 billion times, the odor can be detected, so it can be used as a warning agent for natural gas and petroleum gas, reagent plus odor (the odor in the concentration of 0.00019mg/L can smell). Ethanethiol can also be used in pharmaceutical and other organic synthesis. useful as a stabilizer for adhesives and as an intermediate for chemical synthesis. |
| Méthode de production | 1. From the reaction of sodium ethyl sulfate and sodium hydrosulfide. The sodium ethyl sulfate used in this method was prepared from anhydrous ethanol and fuming sulfuric acid. The overall yield was 60%-65% (absolute ethanol). Domestic this method is more mature, the disadvantage is long route, low yield, high demand for raw materials. It is derived from the reaction of ethyl chloride with sodium hydrosulfide. The yield was more than 80% (based on chloroethanol). 3. From ethanol (or ethylene) and hydrogen sulfide by gas phase catalytic reaction. The reaction is carried out at atmospheric pressure, and the catalyst is impregnated with tungstic acid or sodium tungstate using activated alumina as a carrier. The reaction temperature was 360-380 °c. Ethanethiol yield (based on ethanol), up to 70%-79%. 4. Laboratory preparations can be made from thiourea and bromoethane. The preparation method includes an anhydrous ethanol method, a chloroethane method, an ethanol (ethylene) method, and the like. (1) anhydrous ethanol method with anhydrous ethanol, fuming sulfuric acid and sodium hydrosulfide as raw material. C2H5OH + H2SO4 · SO3 → C2H5OSO2OH + H2SO42C2H5OSO2OH + Na2CO3 → 2c2h2oso2ona + H2O + CO2 ↑ c2oso2ona + NaSH → C2H5SH + Na2SO4 this method is a mature production process in China, but it has a long route, the yield is low, the requirement for raw materials is high, the dosage of acid and alkali is large, and the equipment is corrosive. (2) the ethyl chloride method is obtained by reacting ethyl chloride with sodium hydrosulfide. C2H5Cl + NaSH → C2H5SH + NaCl this method has the advantages of simple process and high yield, Disadvantages are the need for pressure, high requirements for equipment, intermittent operation, high labor intensity, and limited sources of ethyl chloride. (3) the ethanol (or ethylene) method is obtained by reacting hydrogen sulfide gas with ethanol vapor or ethylene in the presence of a catalyst. C2H5OH + H2S → C2H5SH + H2O This method has the advantages of simple process, easy availability of raw materials, low cost, high product purity and continuous production. The main disadvantage is that the reaction temperature is high, hydrogen sulfide is highly toxic, and has strong corrosion to the equipment. |
| Catégorie | flammable liquid |
| Classe de toxicité | poisoning |
| Toxicité aiguë | oral-rat LD50: 682 mg/kg; Inhalation-mouse LC50: 2770 PPM/ 4 h |
| stimulation data | Skin-rabbits 500 mg/24 h mild; eye-rabbit 100 mg/24 h moderate |
| explosive hazard characteristics | explosive when mixed with air |
| caractéristiques de danger d'inflammabilité | in case of fire, high temperature, flammable water, oxidant; toxic sulfur dioxide gas |
| Caractéristiques de stockage et de transport | The warehouse is ventilated and dried at low temperature; Stored separately from oxidants and acids |
| Agent extincteur | dry powder, dry sand, dry stone powder, carbon dioxide, foam |
| Occupational Standard | TWA 1 mg/m3; Tel 1 mg/m3 |
| Température d'auto - inflammation | 570 ° F. |
| immediate life-and health-threatening concentration | 500 ppm |
Disclaimer: Le contenu ci-dessus est destiné à des fins de référence et de communication uniquement entre les initiés de l'industrie, et ne garantit pas son exactitude ou son exhaustivité. Conformément aux lois et règlements pertinents et aux règlements de ce site Web, les unités ou personnes qui achètent des articles connexes doivent obtenir des qualifications et des conditions de qualification valides.
Téléphone de l'entreprise
+86-21-6420 0566
Heures de travail
Du lundi au vendredi
Téléphone portable:
13816217984
Courriel :
info@qinsun-lab.com
